Applicable to Delta DVP series PLC programming cable communicati

 

USB-DVP through the USB interface provides a serial connection and RS232 signal conversion cable programming, in the computer running drive under program control, computer USB interface simulation into traditional serial (known as COM ), which used the various existing programming software, communication software and monitoring software application software. Working power supply from the USB port, a converter box on the light-emitting diode indicating power status and data transceiver state. The cable length: 3 meters, the color: Blue The working temperature: - 20 to + 75 degrees C.. each PC supports multiple USB cable programming, can work at the same time support for long distance communication, maximum communication distance of 2 km ( 9600bps )* support for UART data format: data bits: 7, 8, 1, 2: stop bits, parity bit: odd / even / no parity The baud rate: 300BPS ~ 1Mbps standard automatic baud rate adaptation The USB bus power supply, consumption current of about 50mAThe fully compatible with USB V1.1 and USB V2.0 specificationThe support USBACAB230 programming software version: WPLSoft V2.03 and aboveThe support for the USB-DVP operating system: Win7 / Windows2000 / Windows XPUSB-DVP programming cable is suitable for the delta DVP series PLC. Driver installation is completed, the Windows device manager will appear in USBACAB230 programming cable corresponds to the COM port, only in the programming software or other software application in the COM can, other communication parameters using the default settings, then use with traditional RS232 interface identical programming cable.USBACAB230 programming cable USB need to install the device driver to use,