DC suction cup type electromagnet module DC5V miniature digital signal electromagnet sensor module

description:

Product Name: DC Suction Cup Electromagnet Module

Working voltage: DC5V

Working current: 400mA

 

parameter:

Size: 25*40mm

Weight: 24g

Fixed hole size: 33*18mm

Interface type: 3P sensor anti-plug interface, servo line sequence

Signal type: digital signal

Pin definition: G: negative V: positive S: signal

Working temperature: -20 to 80 ° C

Load reachable: 1KG

Cable: 3P sensor cable, DuPont line

 

Introduction:

An electromagnet is a magnet that generates a magnetic field from a current. It can generate a strong adsorption force when it is energized. Mounting it in the device can stop or move the object to be adsorbed. According to Ampere's law, the current of the wire species produces a magnetic field around the wire. In order to concentrate the magnetic field, the wires are wound into a coil in the electromagnet, and a plurality of wires are arranged side by side. All the magnetic fields of the coil pass through the center of gravity of the coil, where a strong magnetic field is formed. The electromagnet magnet can continuously absorb 1 kg of ferromagnet. The electromagnet module is simple to use, and can control the on and off of the electromagnet in close proximity to the high and low levels of the control signal line.

 

note:

The surface of the object to be adsorbed is as flat as possible and is in zero contact with the electromagnet

The adsorption area should not be less than the adsorption surface of the electromagnet

The adsorbed object should be a magnetically permeable material, low carbon steel, sand steel sheet, etc.

Suction cup electromagnet cannot be used to hold high temperature objects